Home » Bottles / Bottle Valves & Bottle Components » All Products
High Flow, high pressure 1/4" turn valve for fast activation or deactivation of your nitrous flow.
Not your typical hardware store ball valve. Nitrous Supply's High pressure rated 1/4 turn valve is the same one used in our fill station to control nitrous flow. It is rated specifically for the high to extreme pressures that are common in nitrous systems. Don't let a low pressure rated valve ruin your weekend... Valve included adapter for both -4AN and -6AN.
Most bottle valves in the nitrous industry do not have port specifically located to work with the NANO nitrogen/Air push system. Nitrous Outlet has come up with a way to adapt the system to any standard bottle using any nitrous valve available in that bottle.
BY using the push adapter the NANO system can be used without any restriction to flow and positioned to just about any location needed. There are multiple 1/8" and 1/4' NPTF ports on the adapter. The multiple ports allows for bottle pressure gauges and NANO kits to be installed at the same time.
Racer Safety, 8AN male threads and seating area. Diffused for safety of personnel while not mounted in the race car. Blow down tubes and hose assemblies are available from Nitrous Supply.
Note; There are two different sized threads available. A quick simple easy way to tell which size you have. Just measure the outside diameter of the threads on the valve you currently have. #26166 fits the 1/2" nominal measured threads and 26166-2 fits the 5/8" nominal measured threads.
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next »